
- 4 channels with 2 line inputs and 2 phono inputs that are fixed (no phono line switch).
- Phono inputs with dip switches allowing you to change the input capacitance (add +150pF and +250pF to the default 100pF).
- Channel EQ is baxandall type, low and high +/-12 dB.
- Built in subsonic filter (can be bypassed if desired).
- 3 types of outputs – main (XLR, balanced), booth (jack, unbalanced) and rec (RCA). Both main and booth have volume controls, rec out has a fixed volume.
- The meter is an RGB LED that changes its color depending on the average signal, but there is also a peak detector – the meter glows yellow when reaching +12 dBu. The meter is assigned to the main output only.
- THD for 1kHz with 2V RMS input to line in is -100 dB at +4 dBu output level.
- The headphone amp can drive high and low impedance headphones, it’s also low distortion and high output power (300 mW into 32 ohm is achieved with low distortion).
- Dimensions LxWxH [cm]: 33x17x14 (with sides); 31x14x9 (without sides).
Full internal walkthrough and measurements available via Mixers Inside.
